Inkbird Termostato con control de temperatura digital precableado de doble función, 110 V, 1100 W, calefacción y refrigeración, refrigerador

I bought a couple of these have been using them quite a while. They are very accurate easy to hook up and work great.

I got an upright freezer for free and use this INKBIRD to keep it less cold for a spare refrigerator. Awesome, easy to use, and priced right.

Straightforward setup—plug your heater/cooler in and let it maintain your target temperature. Great for fermentation, reptile enclosures, greenhouses, or a freezer/fridge project. The probe is responsive, and it’s been reliable for keeping temps stable.

I upgraded to a much larger chest freezer a while ago, so I am using this controller to turn my older, smaller chest freezer into an extra fridge when needed. The Inkbird thermostat simply cuts the power when the internal temperature of the chest freezer drops a few degrees below the target 40 degrees I have set, and turns the power on again when the temperature rises a few degrees above 40. The exact value of "a few degrees" is programable, I am using 3 degrees. The thermostat displays the current temperature and it stays inside the range. Since the freezer is so well insulated, it takes a long time to rise from 37 degrees to 43 degrees, so the compressor isn't cycling all the time. Apparently operating most freezers above freezing does cause more condensation around the cooling coils …

I purchased this (obviously) not reading it's full capabilities. I bought this to regulate heating in my room because I don't like heating the whole house that's not in use. So one day in December it got to 65F outside and very hot in my room. I have a 2 degree deferential on my unit and I watched it rise 2 degrees above the set heat temperature and I saw the green light click on; which is of course the device is turning on the ac or cooling unit that would be plugged into it.Yes. As long as it heated my room and kept it at the temperature I wanted I didn't care what else it did.So once I saw the green light I bought an extension cord (thick enough gauge) and plugged in my ac unit. Needless to say this thing is perfect and is designed to maintain a perfect room temp within 1 degree of set

Let me start by saying that I work in calibrations for a living and I have dealt with just about every type of temperature controller on the market. I purchased this controller to use on my refrigerator since the internal thermostat had gone bad. Upon receiving this item, the first thing I did was to check the accuracy with a NIST traceable temperature standard. Out of the box this unit was only off by one tenth of one degree Fahrenheit. I almost never see that kind of accuracy in a $35 instrument. The manual is very easy to read and was well translated. The basic setup on my refrigerator only took ten minutes and having observed this controller in operation, it is doing EXACTLY what it is supposed to do. The only advice I have for anyone using this for a refrigerator is to place the …

I gave it only 4 stars because I think the order of the setting options is a bit off and it has weird letters for the control options when setting it, and those are not explained in the booklet that came with it. I feel the most important thing about this instrument is the temperature, and most people on the US Amazon site use Fahrenheit, and the default is Celsius. The selection for C/F is the last setting option, and in my opinion it should be the first. SO>>> I overcame this by finding the CF (Celsius Fahrenheit) setting first (hold "set" for 3 seconds until the figures flash, then click "set" again 7 times to see "CF") and locking that in (hold "set" for 3 seconds) before setting the rest of my controls. I feel CF should be the first because other settings are relevant to this to …

This thing is awesome. I'm using it to revive an old wine fridge I had who's temperature control broke. Now it works better than it did originally. This little thermostat is surprisingly high tech where it not only turns on and off the attached appliance when it meets the correct temperature but it also has tons of settings. For example, I'm able to change how big of a temperature differential I want between it turning off (cold) and turning back (warmer) on. Also, it has temperature alarms that you can set to trigger in case it gets to hot/cold so whatever your trying to do doesn't get damaged even if the fridge/heater fails. It even has a compressor delay, for fridges, so that it will give a minimum time for the compressor to rest before it turns on again. Overall, I'm very impressed …